How to Apply and Remove OG Chiller Mini-Mural Sticker Art

Quick Answer

Apply your OG Chiller Mini-Mural sticker art on a clean, dry surface using a credit card to smooth out bubbles. To remove it, gently peel from a corner while warming the sticker with a hairdryer on low heat to avoid residue.

Step-by-Step Guide to Apply and Remove Your OG Chiller Mini-Mural Sticker

1. 1. Clean and Dry the Surface: Wipe the area of your Chiller (or other surface) with a mild soap solution or isopropyl alcohol to remove oils and dust. Let it dry completely. A common mistake is applying the sticker to a damp or greasy surface, which causes bubbles and poor adhesion.
2. 2. Peel and Position Carefully: Peel the backing paper from one corner of the sticker. Align the design on your Chiller before letting the adhesive touch the surface. Use low-tack tape to hold the sticker in place if needed. A common mistake is peeling the entire backing at once, making it hard to reposition without creasing. Work slowly and check alignment before the adhesive fully contacts the surface.
3. 3. Smooth Out Bubbles with a Squeegee: Starting from the center, use a credit card or a soft squeegee to push air bubbles toward the edges. Apply firm, even pressure. A common mistake is pressing too hard and stretching the sticker, which can distort the design or create permanent wrinkles.
4. 4. Allow the Sticker to Set: Let the sticker sit for at least 24 hours before handling or exposing it to moisture. This allows the adhesive to bond fully. A common mistake is washing or using the Chiller immediately, which can lift the edges. Wait a full day before using your Chiller normally to ensure the sticker stays put.
5. 5. Remove Gently with Heat: When you're ready to remove the sticker, use a hairdryer on low heat to warm the sticker for 30-60 seconds. This softens the adhesive. Then, slowly peel from a corner at a 45-degree angle. A common mistake is pulling the sticker off cold, which can leave sticky residue or tear the decal. If any residue remains, rub it off with a bit of isopropyl alcohol on a soft cloth.

Product Facts

• OG Chiller Mini-Mural Sticker Art: This wrap-around adhesive sticker designed by a female artist comes in several designs, celebrating Mother Nature. The multiple design options let you match your mood, and the wrap-around style means you'll need to align it carefully during application for a seamless look.